Classic Grade Solid European Oak Flooring
Our Classic Solid Oak Flooring is machined from sustainably-sourced European Oak. The wood has a light biscuit tone and displays a pleasing mix of small open knots (up to 25mm in diameter) and scatterings of pip. The knots can be filled and sanded to a smooth finish if preferred. Some boards will display distinctive figuring (medullary rays) which is a natural and much sought after feature of oak. Our Classic Oak Flooring can be supplied unoiled or factory finished with Osmo Polyx Oil which produces a warm biscuit tone and a lovely satin sheen.
Our Classic Oak Flooring is available in a choice of narrow board or wide board floor, for full information see below.
We manufacture all our wood floors to order to ensure that every board is machined from the same batch of timber. Occasionally, the raw timber batch comes in to us a little wider or a little narrower than usual. Individual boards in each batch are always the same width but may not be exactly 150mm or 185mm.
Narrow Board Oak Floors
Supplied as a single width narrow board (i.e. each board you receive will be exactly the same width). The width supplied is dependent on timber availability at the time of manufacture, but is typically 150mm. Ocassionally, the raw timber batch is a little narrower and produces a 140mm finished width. If you are matching up to a floor we've previously supplied, or if it is important to you that your boards are exactly 150mm wide, please contact us to discuss availability.
Wide Board Oak Floors
Supplied as a single width wide board (i.e. each board you receive will be exactly the same width). The width supplied is dependent on timber availability at the time of manufacture, but is typically 185mm. Occasionally, the raw timber batch can be a little wider or narrower, but generally by not more than 5%. If you are matching up to a floor we've previously supplied, or if it is important to you that your boards are exactly 185mm wide, please contact us to discuss availability.
Our solid oak floorboards are supplied in random lengths, usually between 1.5m and 2.5m. Some boards may be supplied longer or shorter than that, depending on raw timber stocks at the time of machining.
All the raw timber we use is sourced from either PEFC or FSC certfied suppliers. The timber is kiln-dried to a moisture content of 8-11% and kept at an ambient temperature in our heated and humidity controlled factory. Our accurately machined floorboards are tongued and grooved on all four edges and can be laid as a structural, load-bearing floor, if required. Every wood floor is made at our premises here in Yorkshire by our skilled wood machinists who ensure that each board is extremely straight, flat and a pleasure to fit. Mass produced, imported floors are not made or quality controlled to the same high standards as a British Hardwoods wood floor.
|Country of Manufacture||United Kingdom|
|Flooring Finish||Oiled or Unfinished|
|Timber Species||European Oak|
|Timber Grade||Classic Grade|
|Width||Wide board (typically 185mm) / Narrow board (typically 150mm)|
|Length||1.5m - 2.5m (average)|
|Edge Detail||Micro Bevel (on long edges) or Square Edge|
|Profile||Tongue and Groove (including ends)|