Sawn Prime Two-Square Edged Oak 27mm (per cubic foot)
Our Rough Sawn Prime Grade 2 Square Edged Timber is supplied by the cubic foot in full sized boards. The boards are supplied in random widths, typically between 102mm and 229mm, depending on stock availability. Board lengths are random, but tend to be between 2.4m to 3m, but can vary due to stock availability.
If you require timber in specific widths or with a planed finish, we would recommend our planed all round oak timber.
Please Note: It is to be expected that rough sawn boards will display watermarking due to the kiln drying process. This completely natural phenomenon occurs as the water dries out from the timber. This natural surface marking, along with any other marks, will be removed when you plane and/or sand the boards.
Our Sawn Prime Grade 2 Square Edged Oak is sustainably sourced from the very best saw mills in France. The heartwood varies from light tan to biscuit in tone and growth rings show an attractive figuring ("silver grain") when quarter sawn. The timber is a prime grade though may contain some small knots and pip. The boards are carefully stored in our heated and acclimatised factory giving an average moisture content of between 9-11%.
We calculate the cubic footage (volume) of a sawn board by multiplying the length x width x thickness (in inches) and converting this figure into a cubic foot calculation. For example a 120" x 5" x 1" board works out at 0.36 cubic foot.
A fairly hard, heavy and dense hardwood, with high crushing and bending strength, low stiffness and resistance to shock loads. Preboring is advised for nailing and screwing, and a reduced planing angle is advised for irregular or cross-grained stock. Oak timber turns satisfactorily, is good for gluing, painting, sanding, staining and varnishing and will take high polish. European oak can be darkened by fuming with ammonia. Due to tannins present in the timber, oak wood will react with ferrous metals when wet. Select non-ferrous (brass or stainless steel) fixings where possible.
Oak timber is often used for furniture and cabinetmaking, quality joinery including church pews and pulpits, office furniture, kitchen cabinets, flooring (including parquet), coffins, boats and harbour work, truck bodies, cooperage for wines, cognac and beer. Planed oak timber is sliced for decorative veneers and rotary-cut to make plywood.
Grows: this species is known to grow across Europe, Turkey, North Africa, Southeastern Canada and Northeastern USA
Typical height: 60-100 ft (18-30m)
Trunk diameter: 4-6 ft (1.2-1.8m)
Specific gravity: 0.72
Typical dry weight: 45lb/ft3 (720kg/m3)
|Country of Manufacture
|Country of Origin
|Kiln Dried to 9-11% Moisture